In order to perform the
OS upgrade from the CLI via the FileZilla FTP Server software, follow the
instructions at upgrading the OS EXCEPT use
the syntax in these examples for the “request system software” commands:
Two examples:
Example-01: Fetching from a FTP server without username and
password
Fetch from a FTP Server, then
reboot after update. The no-copy option is used to save space.
If validation of configuration reports that your current configuration is not working with the new release (e.g. on downgrade), you can bypass this with the no-validate option.
If validation of configuration reports that your current configuration is not working with the new release (e.g. on downgrade), you can bypass this with the no-validate option.
user@ex3300> request
system software add no-copy no-validate ftp://192.168.99.2/jinstall-ex-3300-15.1R5.5-domestic-signed.tgz
user@ex3300> request
system reboot
N.B. In this case, EX3300 switch management
IP address is 192.168.99.1/24 and Laptop IP address is 192.168.99.2/24. Laptop
is connected to switch management port.
Follow
the following steps for FileZilla FTP Server configuration:
First go to Edit>Users
Then add user account for “anonymous”
After that add the
shared folder where the OS is kept and give read permission
Next change your IP
address to 192.168.99.2 with subnet mask 255.255.255.0
Finally check the FTP
server whether it is working or not.
Example-02: Fetching from a FTP server with user and password
Fetch from a FTP Server
(user username), then reboot after update.
user@ex3300> request
system software add no-copy ftp://username:password@ 192.168.99.2/jinstall-ex-3300-15.1R5.5-domestic-signed.tgz
user@ex3300> request system reboot
